Coiltek’s CS-5100 is a repackaging of the reliable and accurate ultrasonic sensing
electronics of the workhorse CS-5000 series control. Configured as a sensing head
connected to a control housing, this version of the non-contact loop control must be
mounted on an existing framework. Like the CS-5000, it is tailored for the specific
purpose of slack loop control. By sensing the height of the stock, the CS-5100 controls
the replenishment of the loop by the feed device (straightener, decoiler, puller, etc.).
Set up in ‘take-up’ mode, it can also control a downstream device, such as a rewind
Super-easy Setup: Takes mere seconds. Push-button set-up or via USB with computer.
Works with many different types of materials: Metals, Plastic Extrusions, Rubber,
Mesh products, Fabric, etc.
Simple two screw mounting to existing stand or framework.
Flexible: May be used very close to the sensor with control ranges from 5 inches
(125mm) to 70 inches.
Using free CSWin software, the control range may be as small as 1 inch and as large as
Useful feature set: allows the user to tailor control to the application.
Multiple Program Set-ups: Up to seven distinct preset loop control profiles may be
stored. Allows multiple tailored loop control algorithms to be instantly employed as
required. Our 3CPO option allows quick operator control over presets.
Two or more may be used in close proximity: Simple multiplex setup eliminates
For more on this unit, check out our downloadable brochure or view the manual.
For more information on this or any other unit including up-to-date pricing, please
call us at (800) 883-7542 or use the form on our Contact Us Page linked at left.